CV Power supplies with DALI

Product family features
  • Dimmable via Touch DIM
  • Available as single-channel or multi-channel with DT6 and DT8 in one device
  • Dimming range: 0.1…100 % (for 50-80-160W) or 1…100 % (for 30W)
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits
  • Intelligent power matching thanks to Smart power supply
  • Form factor for mounting on the cove or in luminaires
  • No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • DALI message detection "LED Module failure"
  • IP rating: IP20
Equipment / Accessories
  • Suitable for 24 V LED modules

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OTi DALI 30/220-240/24 1CH
30 W Yes 103.0 mm 67.0 mm 29.5 mm
OTi DALI 50/220-240/24 1CH G3
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/24 1CH G3
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 1CH G3
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 50/220-240/ 24 4CH DT6/8 G3
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/ 24 4CH DT6/8 G3
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/ 24 2CH DT6/8 G3
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 50/220-240/24 1CH
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/24 1CH
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 1CH
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 50/220-240/24 4CHDT6/8
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/24 4CHDT6/8
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 2CHDT6/8
160 W Yes 300.0 mm 50.0 mm 35.0 mm

Information about Family

Versatile - easy control for dynamic light

This driver is suitable for emergency lighting systems. The output on the multi-channel versions can be shared arbitrarily among the 2 or 4 channels and the PWM frequency > 2kHz minimizes stroboscopic effects.
Areas of application
  • Cove lighting, wall washer, corridor, handrail, luminous ceilings
  • Suitable for use in luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads