Digital Systems
 

OPTOTRONIC FIT D LT2 L

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 120 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 750 mA
  • Non-isolated drivers
Product family benefits
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Products

Sort by:
Product name
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 25/220…240/300 D LT2 L
40…216 V 35…300 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 35/220…240/350 D LT2 L
54…216 V 65…350 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 75/220…240/550 D LT2 L
54…216 V 125…550 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 120/220…240/750 D LT2 L
54…216 V 250…700 mA 360.0 mm 30.0 mm 21.0 mm

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now

Information about Family

The OPTOTRONIC FIT D LT2 L is a non-isolated, constant current LED power supply with an extensive lifespan, that is suitable for use in emergency lighting applications according to IEC 61347-2-13, appendix J. You can use it with luminaires of flexible current setting via the LEDset interface, and in luminaires of protection class I. Highly efficient and reliable, this driver gives you high quality light thanks to its low output ripple current, and protection from overload and overtemperature as well as Hot Plug protection. With an output power range up to 120 W, you are likely to find it useful in many different applications.
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I