Digital Systems
 

OTi DALI 35/220…240/400 D NFC TW L

Product family benefits
  • Control of standard white or Tunable White light acc. DALI device type 8 (DT8)
  • TouchDIM Tunable White integrated for use without additional LMS (planned for end of 2018)
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
Areas of application
  • For Tunable White as well as for 2-channel use (e.g. direct/indirect lighting)
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
  • Perfect system match with PrevaLED Linear Tunable White

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / NFC / Programmable

Total harmonic distortion

< 10 %

Power factor λ

> 0.95

ECG efficiency

up to 90 %

Device power loss

3.0 W

Power loss in stand-by mode

<0.2 W

Inrush current

17 A

Max. ECG no. on circuit breaker 10 A (B)

19

Max. ECG no. on circuit breaker 16 A (B)

28

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

45…240 V

U-OUT (working voltage)

< 250 V

Nominal output current

75…400 mA

Output current tolerance

±3 %

Output ripple current (100 Hz)

< 1 %

Nominal output power

4…38 W

Galvanic isolation

Non isolated

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

235.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.5…9.5 mm

Wire preparation length, output side

8.5…9.5 mm

Height

21.0 mm

Length

360.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Capabilities

Programming interface

DALI, NFC

Dimmable

Yes

Dimming interface

DALI / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

Dimming method

DALI / TouchDIM / TouchDIM Sensor

Constant lumen function

Yes

Overheating protection

Yes

Overload protection

Yes

Short-circuit protection

Yes

No-load proof

Yes

Max. cable length to lamp/LED module

2.0 m

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, output side

Push terminal

Number of channels

2

Programmable features

Operating Current

Yes

Tuning Factor

Yes

Constant Lumen

Yes

Lamp Operating Time

Yes

Thermal Protection

No

Driver Guard

Yes

DALI Settings

Yes

Emergency Mode

Yes

Luminaire Info

Yes

Configuration Lock

Yes

Soft Switch Off

Yes

Dim to Dark

Yes

TouchDIM + Sensor

Yes

Corridor Functionality

Yes

Tunable White CCT

Yes

Tunable White High precision

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / VDE-EMC / CCC / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

850440829000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899990302 UNV 1
4052899990319 VS 20 385mm x 160mm x 100mm 4871.00g 6.16dm³

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now

Information about Family

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Usable as DT6 (2-channel) or DT8 (Tunable White) driver
  • Available with output current range: up to 700 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers
  • DALI-2 certified (Part -101,-102 and -207)

Products

Sort by:
Product name
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 35/220…240/400 D NFC TW L
45…240 V 75…400 mA 360.0 mm 30.0 mm 21.0 mm
OTi DALI 75/220…240/700 D NFC TW L
50…240 V 150…700 mA 360.0 mm 30.0 mm 21.0 mm