QUICKTRONIC FIT 8

Product family features
  • Supply voltage: 220…240 V
  • Line voltage: 198…264 V
  • Line frequency: 50 Hz | 60 Hz
  • Lamp start with optimum filament preheating
  • Energy Efficiency Index EEI: A2
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Lamp operation: to EN 60929
  • Safety: to EN 61347-2-3
Product family benefits
  • Long lamp life
  • No adverse effect from frequent on/off switching
  • Automatic restart after lamp replacement
  • Perfect lamp start for applications with motion sensors
  • VDE/VDE EMC certified system
  • Very high energy efficiency due to cut-off technology

Products

Sort by:
Product
Height
Dimmable
ECG lifetime
Length
Width
Data sheet
QT-FIT8 1X18
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 1X36
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 1X58…70
28.0 mm No 50000 h 280.0 mm 30.0 mm
QT-FIT8 2X18
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X36
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X58…70
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 2X58
28.0 mm No 50000 h 360.0 mm 30.0 mm
QT-FIT8 3X18,4X18
28.0 mm No 50000 h 280.0 mm 40.0 mm
QT-FIT8 3X36
28.0 mm No 50000 h 280.0 mm 40.0 mm

Information about Family

If you are upgrading an existing system, or creating a new light installation with T8 lamps, consider the QUICKTRONIC FIT 8 ECG. It has lamp start with optimum filament preheating, an energy efficiency index of A2 and automatic shutoff of defective lamps and at end of life, and you can use it with luminaires of protection class I for open plan office lighting, corridors, storage rooms, strip lighting and in public buildings. If your LMS uses motion sensors, this ECcG will give you perfect lamp start, and withstand frequent on/off switching. The QUICKTRONIC FIT 8 ECG for T8 lamps enhances lamp life, provides automatic restart after lamp replacement, and is highly energy efficient thanks to its cutoff technology. This ECG has a VDE/VDE MC certified system, assuring you of its quality.
Areas of application
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Strip lighting
  • Suitable for luminaires of protection class I
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads